The Staff Selection Commission (SSC) conducts written exams annually for the post of Junior Engineer (CPWD).

Those Students who will be Completing or Completed Diploma in Civil Engineering from an institution recognized by Govt. of India or equivalent qualification can appear for this selection examination.

• Age Limit: 18-27 years. Relaxation as per Govt. rules


We will try to provide you the best match as we can with respect to the date and timings if our resources allow us to.

  • “Life Time Card” valid for 2 times complete preparation and life time doubt clearance
  • Experienced and Dedicated Faculties
  • Extra classes for building concepts and doubt session
  • 6 hours daily classes
  • 6 days in a week classes
  • 5 – 6 months course duration
  • Pre exam and post exam guidance
  • Flexibility to opt for leaves during semester exams
  • Test series
  • Interview Guidance Programme
  • Subjects Taught from Basic to Advance Level
  • Real Test Environment available
  • Surplus practice and Test Session
  • Academic Excellence and overall grooming
  • Orientation Towards concept building instead of cramming
  • Study Material (Theory and Objective practice booklet, MCQ, Formula Handbook, Previous years question bank)

In the best of your interest, we would advise you to come and visit our mission Engineering center for detailed information

Course Duration: 5-6 Months

Contact : 9582202651, 9643943914


SSC (Staff Selection Commission) Contduct SSC (JE) Computer Based Examination for recruitment of Junior Engineers, Group ‘B’ Non-Gazetted post in various central government departments. Every year SSC released more that 1000 vacancies for the post of Junior Engineer.


Post and vacancies:


1. Central Water Commission Junior Engineer (Civil)
2. CPWD Junior Engineer (Civil)
3. Department of Post Junior Engineer (Civil)
4. MES Junior Engineer (Civil)
5. MES Junior Engineer (Quantity Surveying and Contract)
6. Farrakka Barrage (Project) Junior Engineer (Civil)
7. Central Water Power Research Station. Junior Engineer (Civil)


 Essential Educational Qualifications


S.No. Post Educational and Other Qualification
1. Junior Engineer (Civil), CPWD Diploma in Civil Engineering from a recognized University or Institute.
2. Junior Engineer (Civil), Department of Posts Three years Diploma or equivalent in Civil Engineering from an institution recognized by the Central Government or State Government.
3. (a) Junior Engineer (Civil), MES





(b) Junior Engineer (QS&C), MES

(i) 3 years Diploma in Civil engineering from a recognised institute / University / Board or equivalent;


(ii) Passed Intermediate examination in Building and Quantity Surveying Sub Divisional-II of the institute of Surveyors (India).

4. Junior Engineer (Civil) in Central Water Commission Degree or Diploma in Civil Engineering from a recognised University or Institution.
5. Junior Engineer (Civil) in Farrakka Barrage Project Diploma in Civil Engineering from a recognised University or Institute.
6. Junior Engineer (Civil) in Central Water Power Research Station. Diploma in Civil Engineering from a recognised University.


Scheme of Examination


Papers Mode of Examination Subject Maximum Marks Duration & Timings

Objective type

Computer Based Mode (i) General Intelligence & Reasoning

(ii) General Awareness

(iii) General Engineering

(Civil & Structural)








2 Hours


Morning shift

[10.00 AM to

12.00 Noon]


Afternoon Shift

[2.00 PM to 4.00 PM]








Engineering (Civil & Structural)

300 2 Hours


Date to be intimated later on.

Paper-I will consist of Objective Type Multiple Choice questions only. Candidates who are shortlisted on the basis of performance in Paper –I will be called for Paper-II (Conventional Type).




The standard of the questions in Engineering subjects will be approximately of the level of Diploma in Engineering (Civil/Electrical/Mechanical) from a recognized Institute, Board or University recognized by All India Board of Technical Education. All the questions will be set in SI units. The details of the syllabus are given below:


(i) General Intelligence & Reasoning: The Syllabus for General Intelligence would include questions of both verbal and non-verbal type. The test may include questions on analogies, similarities, differences, space visualization, problem solving, analysis, judgement, decision making, visual memory, discrimination, observation, relationship concepts, arithmetical reasoning, verbal and figure classification, arithmetical number series etc. The test will also include questions designed to test the candidate’s abilities to deal with abstract ideas and symbols and their relationships, arithmetical computations and other analytical functions.

(ii) General Awareness: Questions will be aimed at testing the candidate’s general awareness of the environment around him/her and its application to society. Questions will also be designed to test knowledge of current events and of such matters of everyday observations and experience in their scientific aspect as may be expected of any educated person. The test will also include questions relating to India and its neighbouring countries especially pertaining to History, Culture, Geography, Economic Scene, General Polity and Scientific Research, etc. These questions will be such that they do not require a special study of any discipline.

(iii) General Engineering (Civil and Structural):

Building Materials : Physical and Chemical properties, classification, standard tests, uses and manufacture/quarrying of materials e.g. building stones, silicate based materials, cement (Portland), asbestos products, timber and wood based products, laminates, bituminous materials, paints, varnishes.

Estimating, Costing and Valuation: estimate, glossary of technical terms, analysis of rates, methods and unit of measurement, Items of work – earthwork, Brick work (Modular & Traditional bricks), RCC work, Shuttering, Timber work, Painting, Flooring, Plastering. Boundary wall, Brick building, Water Tank, Septic tank, Bar bending schedule, Centre line method, Mid-section formula, Trapezodial formula, Simpson’s rule. Cost estimate of Septic tank, flexible pavements, Tube well, isolates and combined footings, Steel Truss, Piles and pile-caps. Valuation – Value and cost, scrap value, salvage value, assessed value, sinking fund, depreciation and obsolescence, methods of valuation.

Surveying : Principles of surveying, measurement of distance, chain surveying, working of prismatic compass, compass traversing, bearings, local attraction, plane table surveying, theodolite traversing, adjustment of theodolite, Levelling, Definition of terms used in levelling, contouring, curvature and refraction corrections, temporary and permanent adjustments of dumpy level, methods of contouring, uses of contour map, tachometric survey, curve setting, earth work calculation, advanced surveying equipment.

Soil Mechanics : Origin of soil, phase diagram, Definitions-void ratio, porosity, degree of saturation, water content, specific gravity of soil grains, unit weights, density index and interrelationship of different parameters, Grain size distribution curves and their uses. Index properties of soils, Atterberg’s limits, ISI soil classification and plasticity chart. Permeability of soil, coefficient of permeability, determination of coefficient of 12 permeability, Unconfined and confined aquifers, effective stress, quick sand, consolidation of soils, Principles of consolidation, degree of consolidation, pre-consolidation pressure, normally consolidated soil, e-log p curve, computation of ultimate settlement. Shear strength of soils, direct shear test, Vane shear test, Triaxial test. Soil compaction, Laboratory compaction test, Maximum dry density and optimum moisture content, earth pressure theories, active and passive earth pressures, Bearing capacity of soils, plate load test, standard penetration test.

Hydraulics : Fluid properties, hydrostatics, measurements of flow, Bernoulli’s theorem and its application, flow through pipes, flow in open channels, weirs, flumes, spillways, pumps and turbines.

Irrigation Engineering: Definition, necessity, benefits, 2II effects of irrigation, types and methods of irrigation, Hydrology – Measurement of rainfall, run off coefficient, rain gauge, losses from precipitation – evaporation, infiltration, etc. Water requirement of crops, duty, delta and base period, Kharif and Rabi Crops, Command area, Time factor, Crop ratio, Overlap allowance, Irrigation efficiencies. Different type of canals, types of canal irrigation, loss of water in canals. Canal lining – types and advantages. Shallow and deep to wells, yield from a well. Weir and barrage, Failure of weirs and permeable foundation, Slit and Scour, Kennedy’s theory of critical velocity. Lacey’s theory of uniform flow. Definition of flood, causes and effects, methods of flood control, water logging, preventive measure. Land reclamation, Characteristics of affecting fertility of soils, purposes, methods, description of land and reclamation processes. Major irrigation projects in India.

Transportation Engineering: Highway Engineering – cross sectional elements, geometric design, types of pavements, pavement materials – aggregates and bitumen, different tests, Design of flexible and rigid pavements – Water Bound Macadam (WBM) and Wet Mix Macadam (WMM), Gravel Road, Bituminous construction, Rigid pavement joint, pavement maintenance, Highway drainage, Railway Engineering- Components of permanent way – sleepers, ballast, fixtures and fastening, track geometry, points and crossings, track junction, stations and yards. Traffic Engineering – Different traffic survey, speed-flow-density and their interrelationships, intersections and interchanges, traffic signals, traffic operation, traffic signs and markings, road safety.

Environmental Engineering: Quality of water, source of water supply, purification of water, distribution of water, need of sanitation, sewerage systems, circular sewer, oval sewer, sewer appurtenances, sewage treatments. Surface water drainage. Solid waste management – types, effects, engineered management system. Air pollution – pollutants, causes, effects, control. Noise pollution – cause, health effects, control.

Structural Engineering: Elasticity constants, types of beams – determinate and indeterminate, bending moment and shear force diagrams of simply supported, cantilever and over hanging beams. Moment of area and moment of inertia for rectangular & circular sections, bending moment and shear stress for tee, channel and compound sections, chimneys, dams and retaining walls, eccentric loads, slope deflection of simply supported and cantilever beams, critical load and columns, Torsion of circular section.

Concrete Technology: Properties, Advantages and uses of concrete, cement aggregates, importance of water quality, water cement ratio, workability, mix design, storage, batching, mixing, placement, compaction, finishing and curing of concrete, quality control 13 of concrete, hot weather and cold weather concreting, repair and maintenance of concrete structures.

RCC Design: RCC beams-flexural strength, shear strength, bond strength, design of singly reinforced and double reinforced beams, cantilever beams. T-beams, lintels. One way and two way slabs, isolated footings. Reinforced brick works, columns, staircases, retaining wall, water tanks (RCC design questions may be based on both Limit State and Working Stress methods).

Steel Design: Steel design and construction of steel columns, beams roof trusses plate girders.

New Batch Starts For B.Tech Entrance (LEET) will start on 15th Dec 2019. New Batch Starts For Polytechnic Entrance will start on 11th Nov 2019. New Batch Starts For Polytechnic Even semester will start on 4th Jan 2020. Weekends / Weekdays batches are available for SSC JE / RRB JE / State level JE / DMRC JE / NMRC JE. Polytechnic subject coaching starts on 3 August 2019. Preparation For Campus Placement (written test, group discussion & interview) batch will start on 3 August 2019.